How do I get to the PPC1-Bug prompt?


On Motorola architecture PowerMAX systems you can get to the PPC1-Bug prompt
by typing "<return>~b" from console mode prompt.

        #0>
        #0> <------------ ~b


        ...

        Copyright Motorola Inc. 1988 - 1998, All Rights Reserved

        PPC1 Debugger/Diagnostics Release Version 4.1 - 10/12/98 RM01
        COLD Start

        Local Memory Found =04000000 (&67108864)

        MPU Clock Speed =200Mhz

        BUS Clock Speed =67Mhz

        Reset Vector Location  : ROM Bank B
        Mezzanine Configuration: Twin-MPU
        Current 60X-Bus Master : MPU0
        Idle MPU(s)            : MPU1 

        System Memory: 64MB, ECC Enabled (ECC-Memory Detected)
        L2Cache:       256KB

        PPC1-Bug>

This resets the VMEbus in addition to taking you to the PPC1-Bug prompt.


For more information see manual "Power Hawk 610/620/640 Console Reference Manual".